[Lambda Corp.] Interrogation Room v.1 Version 1

*Visit In-World Store for Discounts!*

Enter the realm of secrets by accessing them through unconventional means! Lower your enemies or friends down to a chamber that is accessible only by elevator/lift from the terminal above. Enclose the chamber via the terminal with advanced transparency and phantom/solid state control.

*Free Materials enabled static door!
*This item is a skybox! This means that it has no exterior build supporting it. The details are saved for the interior!

*SEE VIDEO FOR A PEAK OF THE OBJECT*

▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂

[ Usage; Buttons ]

• Locate the terminal and click the buttons labeled '1' or '2';

-Button '1' will raise the elevator/lift to level 1 (The Top level)
-Button '2' will lower the elevator/lift to level 2 (The Bottom level)

• 'Center-Left' button on the terminal will toggle the full transparency and volume of the base-floor and the elevator/lift in opposite settings;

-Invisible = No Volume; you will not be able to walk on the object if the base-floor is invisible.

*Tip: When toggling the transparency button, do so with the elevator/lift at the bottom level (2). Wait a few seconds as the sound will play as soon as the transparency of the base-floor (top level) changes.

• 'Center-Right' button will activate the approximate 50% transparency of the top level base-floor so that you can see the chamber below (level 2)

-Use the 'Center-Left' button again to remove the transparency and alternate until you achieve the desired effect of your two choices.

▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂

[ The Lift ]

• Utilizing the lift is best done if the top level base-floor is transparent, otherwise, people will not be able to access the lift. Press buttons '1' or '2'

▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂

[ Editing ]

• It is advised that no items are moved with the exception of the invisible lights that create beautiful material/shine effects. The only item in this pack modifiable are the lights - Press control + alt + t to access your viewers transparency mode and locate the invisible rectangular objects that are in front of the window/lights on the walls. You should be able to change the color of these lights - If using Firestorm viewer, go into edit mode and locate the Features Tab → Light Checkbox will be 'checked' and you may select the color from there.