Laser Lighting Club Lights

GCD Lazer Lights System

The lights are designed for use in Live Stage events and also Clubs & Bars.
They also have some fantastic unique features.

1) You can set up multiple sets of lights all using different chat channels and each with its own remote control – You can also label each remote – Set 1, Set 2, Front, Back etc
2) You can set the lights to ANY color using the remote controlled ‘Color Picker’ & Light/Dark Adjust.
3) The Remote Controller has a unique Auto Color, Beam Pulse’ & ‘Movement’ functions.
4) You can set the beam, color, auto functions, glow, position, rotation and on/off all via the Remote Controls.
5) You can set access to the remote controller (Group, Public or Owner)
6) The lights are 100% Mesh and 10 prims at standard size
7) You also get a HUD version of the remote which can be attached to your screen
8) The lights and remote use mono scripting and ‘linkset’ technology, so they use very few scripts for as lower lag as possible. Also all items are Copy & Modify(not scripts).
9) These lasers have 4 different beam pulse speeds..

*********************************************************************
The Light Pack Includes:
1) Copyable Laser Ring (Mesh 10 prims at standard size.)
2) Remote Controllers – Inworld Version (5 prims) & HUD Version (no land impact)
3) Optional Steel Cable Mount:
4) Master Light Remote Controller and Sub Light Controls Rezzer

*********************************************************************

MASTER LIGHTING REMOTE
This is useful if you have several lights from my collection (8 available).
You can control all the different types of light at once as well as rez individual sub remotes.

OPTIONAL REMOTE & LIGHT CONFIGURATION.
In Edit mode, right click on the remote and in the contents inside the you will find a notecard called ‘Configuration”. Here you can set the chat channel that the remote uses as well as access settings (Group, Owner, Public), the Beam Pulse timer setting and use up to 5 letters to label your remote, so you know which remote is which. There is further instructions inside the Configuration notecard. Once your done just save the notecard and reset the scripts. Remember if you change to a new chat channel you will need to set up a light with the same chat channel – You will find a configuration notecard inside each light where you can set this. (again just save the notecard and reset the lights scripts)

REMOTE CONTROL FUNCTIONS
MAIN ON/OFF
Far top right you have the main power switch which turns the lights On and when turned Off will shut down all light functions and return the light to its default position.

NAME LABEL
To the left of the Main on/off you will see a 5 character word which you can use to label the remote, so you know which remote works with which set of lights. Inside the remote you will find a configure notecard which you can use to set this word – For example you could use Set1, Set 2, Front. Back, etc – Just type in the 5 letter word you want and save the notecard.

COLOR PICKER.
This is the section on the upper left.
Just click on the ‘Color Picker’ to set the color you want and then use the ‘grayscale’ section just to the right to adjust the light/darkness.
Using this section, you can set the Lights to any color you want.

GLOW SETTINGS
Below this in the lower left you’ll see a selection of pre-set 'Glow' buttons that sets the lights GLOW.

AUTO CONTROLS
Below the Main Power on the right you will see 3 Auto On/ Off buttons
*COLOR CYCLE - This automatically changes the color of the lights for you and cycles through a selection of colors.
* BEAM PULSE - This automatically flashes the beam on and off and cycles through the various beam types. You can adjust the timing of this in the Configuration notecard.
* AUTO MOVE – This starts and stops an auto movement sequence.

LIGHT BEAM FLASH
On the middle right side you’ll see there is a choice of 4 different laser light beam Flash Speeds 0,1,2 & 3 ,

MOVEMENT CONTROLS
Bottom left you will see the ‘Movement’ section.
The green arrows choose direction and speed – the dark green arrows move the lights slowly. The lighter green arrows are fast. The arrows on each side of the stop button move the whole laser ring and the ones above and below move the individual beams. The STOP button stops all movement and resets the light to its default position.

MIX BEAM COLORS
This quickly sets all 8 beams to different colors.
You Can View & Demo All My Lights At My Store:re:

• Laser Lighting Club Lights System
• Mesh Lazer Light Lasers