[URW]_HELI_EXTREME Version 1.3

[URW]_HELI_EXTREME
=====================================
VERSION: 1.3
LAST UPDATE: 03-07-2011
PERMISSIONS: Mod/Copy/No Transfer
PRIMCOUNTS:
- HELI: 6
- CONTROLLER: 14

PRODUCT CONTENT:
=====================================
- [URW]_HELI_250_EXTREME
- [URW]_HELI_500_EXTREME
- [URW]_HELI_CONTROLLER
- [URW]_HELI_EXTREME README

** The 500_EXTREME CONTAINS MEGAPRIMS **

MANUAL:
=====================================
[URW]_HELI_EXTREME:

Best to place the Heli light effect in EDIT mode.
When the Heli Top Prim is pressed by the owner, a menu will appear with the following options:
- Set 1, 2, 3: With these functions you can create 3 groups of Helis. Default is Set 1.
- RESET: With this function you reset the Heli to the default settings.
- Quit: To exit the menu the correct way.

[URW]_HELI_CONTROLLER:

The Controller has 43 buttons;
- CONTROLLER SCREEN ON/OFF.
- ON/OFF: To enable/disable Heli and Controller.
- P1, P2, P3: To set the Heli Programs.
* P1: Color Change.
* P2: Color Change On/Off.
* P3: StroboScope.
- /|\ ->: To start the Beams movement.
- C1, C2, C3, C4, C5, C6, C7, C8: Change Colors.
* PURPLE, ORANGE, YELLOW, GREEN, MAGENTA, WHITE, RED, BLUE.
- C1, C2, C3, C4, C5, C6, C7, C8: Change Colors On/Off.
* PURPLE, ORANGE, YELLOW, GREEN, MAGENTA, WHITE, RED, BLUE.
- P1 SPEED1, 2, 3: To set speed of the P1 Program (ColorChange).
- P2 SPEED1, 2, 3: To set speed of the P2 Program (ColorChange On/Off).
- P3 SPEED1, 2, 3: To set speed of the P3 Program (Strobo).
- /|\ x 3: To stop Beam movement and set in predefined position (Takes 8 seconds).
- ROT SPEED 1, 2, 3, 4: Set rotation speed (1 is stop rotation completely, 4 is fast).
- ROT P1, P2: 2 Different Beam movement speeds.

MENU:
- Owner, Group, All: You can make the Controller accessible for Owner, Group and All. Default is Group.
- Set 1, 2, 3: With these functions you can create 3 groups of MovingHeads. Default is Set 1.
- Quit: To exit the menu the correct way.
- Update: To check for product Updates.