URW MOVINGHEAD EXTREME バージョン 1.2

[URW]_MHEAD_EXTREME
=====================================
VERSION: 1.2
LAST UPDATE: 03-07-2011
PERMISSIONS: Mod/Copy/No Transfer
PRIMCOUNTS:
- MOVINGHEAD: 5
- CONTROLLER: 14

PRODUCT CONTENT:
=====================================
- [URW]_MHEAD_250_EXTREME
- [URW]_MHEAD_500_EXTREME
- [URW]_MHEAD_GOLIATH_EXTREME
- [URW]_MHEAD_ZEUS_EXTREME
- [URW]_MHEAD_CONTROLLER
- [URW]_MHEAD_EXTREME README

** The 500, GOLIATH, ZEUS MOVINGHEADS CONTAINING MEGAPRIMS **

MANUAL:
=====================================
[URW]_MHEAD_EXTREME:

Best to place MovingHead in EDIT mode. MovingHeads will be rezzed higher above the ground.
When the MovingHeads foot is pressed by the owner, a menu will appear with the following options:
- Set 1, 2, 3: With this functions you can create 3 groups of MovingHeads. Default is Set 1.
- FLOOR/ROOF: You can set Floor Or Roof placement for correct rotation. Default is FLOOR.
* Choose FLOOR if the foot is at the bottom.
* Choose ROOF if the foot is at the top.
- RESET: With this function you reset the MovingHead to the default settings.
- NO DELAY, DELAY 1, DELAY 2: You can determine the MovingHead to response a bit later.
* NO DELAY: Response without delay.
* DELAY 1: Response with 0.2 seconds delay.
* DELAY 2: Response with 0.4 seconds delay.
- Quit: To exit the menu the correct way.
- SOUND ON/OFF: Set MovingHead sound on/off.

[URW]_MHEAD_CONTROLLER:

The Controller has 43 buttons;
CONTROLLER SCREEN ON/OFF.
ON/OFF: To enable/disable MovingHeads and Controller.
P1, P2, P3, P4: To set the MovingHeads Programs.
* P1: Color Change.
* P2: Color Change On/Off.
* P3: StroboScope.
* P4: Random.
C1, C2, C3, C4, C5, C6, C7, C8: Change Colors.
* PURPLE, ORANGE, YELLOW, GREEN, MAGENTA, WHITE, RED, BLUE.
C1, C2, C3, C4, C5, C6, C7, C8: Change Colors On/Off.
* PURPLE, ORANGE, YELLOW, GREEN, MAGENTA, WHITE, RED, BLUE.
P1 SPEED1, 2, 3: To set speed of the P1 Program (ColorChange).
P2 SPEED1, 2, 3: To set speed of the P2 Program (ColorChange On/Off).
P3 SPEED1, 2, 3: To set speed of the P3 Program (Strobo).
P4 SPEED1, 2, 3: To set speed of the P4 Program (Random).
ROT SPEED 1, 2, 3, 4: Set rotation speed (1 is slow, 4 is Fast).
ROT P1, P2: 2 Different rotation Programs.

MENU:
- Owner, Group, All: You can make the Controller accessible for Owner, Group and All. Default is Group.
- Set 1, 2, 3: With this functions you can create 3 groups of MovingHeads. Default is Set 1.
- Quit: To exit the menu the correct way.
- Update: To check for product Updates.