cCCameraSwitcherPRO.2 Version 1.3

Camera switcher.
The switching of the camera viewpoint.
By connecting the specified point, it can be smoothly viewpoint movement.
Crane Shot, Dolly Shot, Aerial, you can set a variety of movement.

== Main function ==
・Any camera position (the viewpoint) can be registered up to a maximum of 20 locations.
・Button With just click, to switch to the position that has registered a point of view.
・Change the movement speed, until the position you have registered,
　　can move at the specified speed.
・It is connected to decide the movement speed to the specified position each.
・The program register up to 20, it can be registered.
・The simplifying of operation, basic operation was to allow only each button.

== Role of each button ==
・Main switch "■".
　　Click ---- ON / OFF switching.
　　Hold down ---- Rearranged of each button "○" .

・Position button "numbers".
　　Click ---- Move to the registered location.
　　Hold down ---- Register the location.

・Program button "Alphabets".
　　Click ---- To start the registered program.
　　Hold down ---- Registration of the program.

・Changing button "◎".
　　Click ---- The number of position buttons "1 to 20",
　　　　　　　The Alphabetic "A~T" of the program button, Change.

== Instruction ==
・When you attached to the avatar, it will be attached to the "HUD center 2".
・Simple situation is displayed on the main button "■". (Floating text)
・Since the beginning, nothing is registered, and does not respond when you press each button.
・If the HUD attaching, the screen of that time, to remember.
・When the operation in the switch was to OFF,
　　when you press the "esc" key to return to remember screen.

== Registration program ==
・When in-destination not performing position registration, you can not program registration.
・Your favorite program button, press long. (Alphabets button)
・And color of the HUD will change, it will be the program registration status.
・First-, you press the "esc" key.
・Press the position button you want to register. (numbers buttons)
・Screen switches.
　　(if it does not change, then press the "esc" key)
・This location is first registered most.
・Next, press the position button you want to register. (numbers buttons)
　　(If the wrong position button, you press,
　　Please re-press the correct position button.
　　Situation it can be confirmed in a floating text)
・Dialog is displayed.
・In the dialog, from the location that was registered in the beginning,
　　until the location of the button you press now, and set to choose a move time.
　　(Button in the dialog is "1" is the moment, the speed will slow down the number is large)
・Press the dialog button, until location you press now,
　　and then starts to move in the chosen speed.
・When the move is completed, the dialog of "This movement, OK? or NO?" Appears.
・In the case of OK, you want to register to the next, press the position button.
・In the case of NO, since the screen will return to the previous location,
　Please try again from the registration of the position buttons. (numbers buttons)
・In this repeat, please register as much as you like.
・After all be registered, press the yellow button program, registration ends.

== Other additional functions ==
● position button (number buttons) during switching, move at any speed.
・If you type "/ 44 speed" in chat, you can choose the speed dialog is displayed.

● more detail to set the speed.
・When you type the example in the chat,
　　it is possible to change the numerical value of the dialog.
　　Example, "/ 44 1,10,20,50,75,100,125,300"　(Several that can be set up to 12.)

● the operation that program registration, repeat loop.
・If you type "/ 44 repeat" in chat, the operation of the program will be repeated forever.
・If you want to stop the loop, press the main button.
　　(After moving to the end of the registered program, and then exit)
・If you want to cancel, repeat process, type "/ 44 notrepeat" in chat.

● Change of program registration playing, the operating environment.
・If you type "/ 44 live" at chat, when the playing, you can press the main switch,
　You will be stopping the motion at any time.
・If you type "/ 44 create" at chat, time of playing, pressing the main switch,
　After you playing to the point where it was last registered, it will stop movement.
※In the case of "/ 44 live" setting, and the influence of the load such as SIM,
　movement may no longer stable.
　In the case of "/ 44 create" setting, operability is bad, the movement is stable.

● If you want to change the size of the HUD, so editable,
　　should be adjusted in the "right-click --- editing --- stretch".
　
●Most operations, and has been so performed while checking the floating text.

　
Please send in the note card to a question etc.
Use the cC Camera Switcher PRO, please enjoy.

The latest information at this web site, please check.

https://ccdesignlab.blogspot.com/2016/02/cccameraswitcherpro2-hud-description.html