[Fenix] Wall Set A Building Kit Version 1.0

Thank you for purchasing this FP building set from Fenix
=====================================================================

INTRODUCTION
==========

Wall Set A is a building set with multiple options for walls with window openings and doorways.

Specifications:

- Standard size for all pieces is 4m (height) by 4m (length) by 0.2m (width), except for the corners, which depend on the version selected (but will still be 4m in height).
- Al pieces are designed to work together, using the align tool for best results.
- All can be resized both vertically and horizontally
- All parts have different faces that can be edited separately using the 'Select Face' build option. There is a "faces" model included to show the different faces.
- You will get better results using seamless textures, aligned in planar mode. However, some non seamless textures (aligned in planar mode) will work fine and can possibly look very good.

OVERVIEW OF THE DIFFERENT PIECES
============================

The system contains the following wall parts:

1 Straight (.5 li)
20 Straights with Windows (.8li)
4 Straights with Doors (2li if made walkable, .5 if convex hull)
2 90 degree Corners (1x1 and .5x.5)
2 60 degree Corners (1x1 and .5x.5)

When resizing the window or door pieces, be aware that the size for the opening will change. Also, for these pieces, the land impact will change depending on the size. resizing a window or door piece will increase the land impact up to 4li (at 64m in length)

Windows

There are 18 different walls with windows. 9 with the opening centered, and 9 with the opening offset by .5m - in the following sizes (size of window opening)
1x1, 1x2, 1x3, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3

There are also two additional windows with arched tops in 2x3 and 3x3.

Doors

There are 4 Door pieces to choose from.
1 standard door 2x3
1 standard door 3x3
1 Arched doorway 2x3
1 Arched doorway 3x3

Corners

There are 2 different corner pieces, one for outside corners, and one for inside corners. These both come in either a .5m or 1m version

FACES
======

Please look at the FACES model for reference.
In general each piece has 5 faces.
1: The left and right sides and top and bottom (referred to as "Frame")
2: "Front"
3: "Back"
4: Top of the "Step"
5: "Step"

The corners have 2 additional faces for each separate side of the corner on the inside and outside

© Copyright 2017, Fenix sillyjester (Jessica Windsong)