G General

Measure Tape v.4.6

Measure Tape v.4.6
Detalles
Funciones
Contenidos
Reseñas

********** Measuring the distance and position of "Measure Tape" **********

You want to measure the sizes of your house or mountain height?
You want to know distance between regions or your position in global coordinates Second Life.
You want to know on how many far you have left from your house?
Then our measuring instrument "Measure Tape" is intended for you.
"Measure Tape v.4.6" defines any distances within Second Life.

At us you get at once two measuring instruments:
1. "Measure Tape" - for measurement of the sizes and distances, and
2. "Measure Tape - HUD" - for measurement of position and distances.

Both measuring instruments have three modes of measurement:
1 mode - measurements are made concerning global system of coordinates;
2 mode - measurements are made concerning regional system of coordinates;
3 mode - measurements are made concerning the remembered reference point.

For switching between modes press the left button of the mouse on "Measure Tape" and keep its pressed 2-3 seconds

The measuring instrument "Measure Tape" shows five parameters:
S - Distance between a measuring instrument "Measure Tape" and a zero reference point;
H - the Difference of heights between a measuring instrument "Measure Tape" and a zero reference point;
L - Distance between a measuring instrument "Measure Tape" and a zero reference point at height of position of a zero point;
X - measuring instrument Position "Measure Tape" on an axis X in the chosen system of readout;
Y - measuring instrument Position "Measure Tape" on axis Y in the chosen system of readout.

Measurement of distances is carried out between a zero point of system of readout and a red point at measuring instrument top "Measure Tape".
Measurement of distances by a measuring instrument "Measure Tape - HUD" is carried out between its center and a zero reference point.

===========================================================================

********** Измеритель расстояния и положения "Measure Tape" **********

Вы хотите измерить размеры вашего дома или высоту горы ?
Вы хотите знать расстояние между регионами или Ваше положение в глобальных координатах Second Life.
Вы хотите знать на сколько далеко вы ушли от вашего дома ?
Тогда наш измеритель "Measure Tape" предназначен для Вас.
"Measure Tape v.4.6" определяет любые расстояния в пределах Second Life.

У нас вы приобретаете сразу два измерителя:
1. "Measure Tape" - для измерения размеров и расстояний, и
2. "Measure Tape - HUD" - для измерения положения и расстояний.

Оба измерителя имеют три режима измерения:
1 режим - измерения производятся относительно глобальной системы координат;
2 режим - измерения производятся относительно региональной системы координат;
3 режим - измерения производятся относительно запомненной точки отсчета.

Для переключения между режимами нажмите левой кнопкой мыши на "Measure Tape" и удерживайте ее нажатой 2-3 сек.

Измеритель "Measure Tape" показывает пять параметров:
S - Расстояние между измерителем "Measure Tape" и нулевой точкой отсчета;
H - Разницу высот между измерителем "Measure Tape" и нулевой точкой отсчета;
L - Расстояние между измерителем "Measure Tape" и нулевой точкой отсчета на высоте положения нулевой точки;
X - Положение измерителя "Measure Tape" на оси X в выбранной системе отсчета;
Y - Положение измерителя "Measure Tape" на оси Y в выбранной системе отсчета.

Измерение расстояний осуществляется между нулевой точкой системы отсчета и красной точкой на вершине измерителя "Measure Tape".
Измерение расстояний измерителем "Measure Tape - HUD" осуществляется между его центром и нулевой точкой отсчета.