Scobas Sysco Swing Working Door Scripted

Introduction to the SySco system
==========================
The SySco System is an integrated house builders system which allows you to control any SySco device centrally via the controller or individually at the device itself.

The SySco Central Controller stores the user list and certain global options centrally and transmits them to the installed devices (doors, windows etc). This saves you the inconvenience of maintaining user lists within each device.

All SySco devices may be controlled from the Central controller using the unique touch sensitive SySco menu system.

All SySco devices may be operated individually by clicking on them, eg to open and close the device. Or if further control is required, you may hold the left mouse down over the device for about 5 seconds, and you will activate the blue menu.

Each component of the system is full perm and is designed for personal use or builders resale. You are not permitted to sell these devices separately.

The SySco System works by defining a Device Channel and defined device names. All components in any system must be configured with the same Device Channel and each device must be called Door 1, Door 2, etc up to Door 7 (in the device notecard). The actual values are documented in the config notecard for each device.

You may operate several SySco systems in close proximity simply by assigning a different channel number to each system. Channel numbers range from -2,147,483,648 to 2,147,483,647.

All SySco devices have a multitude of options, which are all fully documented in the configuration notecards that come with each device.

The swing door is a 50% cut prim and rotates about it's central axis to simulate the action of a swing door. You may alter the number of degrees the door opens, so this device could be the basis for may other types of swinging devices, eg bridges, ramps and blinds.

You may link the swing door into your build.

If you wish to make double doors which open and close together, you must assign both doors the same Device channel AND Device name. They will then act as one. You will need to change the opening angle to negative so that they open and close in opposite directions.

***** If you buy this product, you must also buy the SySco controller. *****

nb. scripts are no mod.