TM Inflatable Boat and Motor with Hop

This boat can be used by the owner or anyone.
The Owner can touch it when NOT in the driver position to toggle it from Owner-Only access to Anyone access.

It works on Linden water only.

To sit on the driver's seat, use the pie menu and choose Board. It has a custom pose made for this boat.

The other seats are set to sit automatically.

When someone sits in the driver's seat, help messages will be displayed.

Once the boat is being driven, it can be touched to set it to phantom so it can pass through most objects. The riders are still solid however. Touch it again to make it solid again at any time. It returns to solid when the driver stands.

The driver uses the arrow buttons to change speed and direction.

The Page-Down button idles the engine and stops the motion.
The boat goes faster if you keep pressing the forward arrow, less if you press the back arrow. It can go backwards slowly.

Holding down the Page-Up button will push the boat upward for up-to 17 meters higher for a short time to help you hop over obstacles and for fun. Gravity will eventually pull it back down and air resistance will slow its forward motion while in the air.

The motor sound changes with speed.

Other than the driver, two other seats are available for others.

It has accurate physics and great LOD.

The boat is Modify and Copy.

Many surfaces colors can be changed using surface/texture selection in the Edit dialog.

The motor has a logo on the sides and back that you can change using edit surface/texture.

With care using Edit Links, the motor can be un-linked from the boat. The front and middle seats are also separate objects that can be changed or removed.

It has no water spray particles to reduce prims and lag.

As it comes, it is 4 prims and 7 land impact. Once the driver sits, it becomes 10 land impact.

As with all vehicles, crossing a sim border too quickly can toss the driver or passengers off the boat.