Leety's DMX scanner / club lights

Leety's DMX SCANNER
---------------------------
Included in the box are:
- DMX_scanner_Left
- DMX_scanner_Right
- DMX_controller
- DMX_hud
- Notecard with this info
- Landmark to my shop

Installation
-------------
When you rez a scanner it will spawn in the air. There are 2 components, the lightbeam and the scanner itself. Make sure you select them both before you start moving it.
Also make sure motion is off when you move the scanners.
Lower them untill the gobo is no longer visible, then go back up a tiny bit so the gobo is just above the floor.

Controller
-------------
LIGHT:
- Light on, light off
- red, green, blue, blue2, pink, orange, yellow, white
- random (gives every different scanner a random generated color)
- auto (changes color every 15 seconds)

ROTATION
- Slow, medium, fast, off
This makes the beam and gobo rotate

MOTION
- Slow, medium, fast, stop, auto
This makes the beam and gobo move around. Auto changes between speeds every 60 seconds.

GOBO
- 8 different gobos to choose from. Gobo 1 and 2 also uses another beam

STROBE
- Slow, medium, fast, insane, stop

SETTINGS
- Transp+, Transp- (changes the beam+gobo transparency)
- Glow+, Glow- (changes the amount of glow)
- Reset (back to default)

HUD
-----
The controller hud is worn on center but you will see it at the middle left of your screen. I did this so you can use it with the huds I made for my moving head lights, they show on top and bottom left.
If you use the auto programs make sure you run them from the hud or from the controller. If you run them at the controller and hud at the same time it will not work correctly. This is because it's a program that is running from the controller or hud. If you start a auto program from the hud and unwear it it will stop.

COMMANDS
--------------
You can also use chat commands to control the scanners. They are running on channel 666. Here are some of the most important commands:
/666 color (changes color, example: '/666 red')
/666 motion1 , /666 motion2, /666 motion3, /666 motionoff
/666 gobo1, /666 gobo2, ...
/666 Brot1, /666 Brot2, /666 Brot3, /666 Brotoff (gobo rotation)

Specs
--------
7 prims / controller
9 prims / scanner.
You can also remove the scanner so only the beam remains. This way it uses only 3 prims.

All scanners work on the same channel, I maybe release a version on a second channel soon. I will not update this version to work on multiple channels !

Need help?
--------------
If you have questions or comments please contact 'MissLeety' ingame.
Same if you need a custom gobo I can do that for a price.

Come check out the demo in my shop!
!!! Thanks for your purchase !!!